5 files changed, 337 insertions, 0 deletions
diff --git a/.config/i3/config b/.config/i3/config
new file mode 100644
index 0000000..86a0ee1
--- /dev/null
+++ b/.config/i3/config
@@ -0,0 +1,238 @@
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+#
+# This config file uses keycodes (bindsym) and was written for the QWERTY
+# layout.
+#
+# To get a config file with the same key positions, but for your current
+# layout, use the i3-config-wizard
+#
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:Maple Mono NF 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Start XDG autostart .desktop files using dex. See also
+# https://wiki.archlinux.org/index.php/XDG_Autostart
+exec --no-startup-id dex --autostart --environment i3
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+exec setxkbmap -option "caps:super"
+exec nitrogen --restore
+exec alacritty --hold -e sudo pacman -Syu
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +2% && $refresh_i3status
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -2% && $refresh_i3status
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
+bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
+bindsym XF86AudioPause exec --no-startup-id playerctl play-pause && $refresh_i3status
+bindsym XF86AudioNext exec --no-startup-id playerctl next && $refresh_i3status
+bindsym XF86AudioPrev exec --no-startup-id playerctl previous && $refresh_i3status
+
+# use these keys for focus, movement, and resize directions when reaching for
+# the arrows is not convenient
+set $up j
+set $down k
+set $left l
+set $right semicolon
+set $mod Mod4
+
+# use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# move tiling windows via drag & drop by left-clicking into the title bar,
+# or left-clicking anywhere into the window while holding the floating modifier.
+tiling_drag modifier titlebar
+
+# start a terminal
+bindsym $mod+Return exec alacritty
+
+bindsym Print exec flameshot gui
+
+# kill focused window
+bindsym $mod+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec --no-startup-id rofi -show drun
+# A more modern dmenu replacement is rofi:
+# bindsym $mod+d exec "rofi -modi drun,run -show drun"
+# There also is i3-dmenu-desktop which only displays applications shipping a
+# .desktop file. It is a wrapper around dmenu, so you need that installed.
+# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym $mod+$left focus left
+bindsym $mod+$down focus down
+bindsym $mod+$up focus up
+bindsym $mod+$right focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+$left move left
+bindsym $mod+Shift+$down move down
+bindsym $mod+Shift+$up move up
+bindsym $mod+Shift+$right move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+# move the currently focused window to the scratchpad
+bindsym $mod+Shift+minus move scratchpad
+
+# Show the next scratchpad window or hide the focused scratchpad window.
+# If there are multiple scratchpad windows, this command cycles through them.
+bindsym $mod+minus scratchpad show
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+# switch to workspace
+bindsym $mod+1 workspace number $ws1
+bindsym $mod+2 workspace number $ws2
+bindsym $mod+3 workspace number $ws3
+bindsym $mod+4 workspace number $ws4
+bindsym $mod+5 workspace number $ws5
+bindsym $mod+6 workspace number $ws6
+bindsym $mod+7 workspace number $ws7
+bindsym $mod+8 workspace number $ws8
+bindsym $mod+9 workspace number $ws9
+bindsym $mod+0 workspace number $ws10
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace number $ws1
+bindsym $mod+Shift+2 move container to workspace number $ws2
+bindsym $mod+Shift+3 move container to workspace number $ws3
+bindsym $mod+Shift+4 move container to workspace number $ws4
+bindsym $mod+Shift+5 move container to workspace number $ws5
+bindsym $mod+Shift+6 move container to workspace number $ws6
+bindsym $mod+Shift+7 move container to workspace number $ws7
+bindsym $mod+Shift+8 move container to workspace number $ws8
+bindsym $mod+Shift+9 move container to workspace number $ws9
+bindsym $mod+Shift+0 move container to workspace number $ws10
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+  # These bindings trigger as soon as you enter the resize mode
+
+  # Pressing left will shrink the window’s width.
+  # Pressing right will grow the window’s width.
+  # Pressing up will shrink the window’s height.
+  # Pressing down will grow the window’s height.
+  bindsym $left       resize shrink width 10 px or 10 ppt
+  bindsym $down       resize grow height 10 px or 10 ppt
+  bindsym $up         resize shrink height 10 px or 10 ppt
+  bindsym $right      resize grow width 10 px or 10 ppt
+
+  # same bindings, but for the arrow keys
+  bindsym Left        resize shrink width 10 px or 10 ppt
+  bindsym Down        resize grow height 10 px or 10 ppt
+  bindsym Up          resize shrink height 10 px or 10 ppt
+  bindsym Right       resize grow width 10 px or 10 ppt
+
+  # back to normal: Enter or Escape or $mod+r
+  bindsym Return mode "default"
+  bindsym Escape mode "default"
+  bindsym $mod+r mode "default"
+}
+
+bindsym $mod+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+  status_command i3blocks -c ~/.config/i3/i3blocks.conf
+  # mode hide
+
+  colors {
+    background #111111
+    statusline #ffffff
+    separator #666666
+
+    #                  border  bg      text
+    focused_workspace  #ffffff #aaaaaa #444444
+    active_workspace   #cccccc #888888 #444444
+    inactive_workspace #444444 #000000 #888888
+    urgent_workspace   #2f343a #900000 #ffffff
+    binding_mode       #2f343a #900000 #ffffff
+  }
+}
+
+#######################################################################
+# automatically start i3-config-wizard to offer the user to create a
+# keysym-based config which used their favorite modifier (alt or windows)
+#
+# i3-config-wizard will not launch if there already is a config file
+# in ~/.config/i3/config (or $XDG_CONFIG_HOME/i3/config if set) or
+# ~/.i3/config.
+#
+# Please remove the following exec line:
+#######################################################################
+exec i3-config-wizard
diff --git a/.config/i3/i3blocks.conf b/.config/i3/i3blocks.conf
new file mode 100644
index 0000000..981c368
--- /dev/null
+++ b/.config/i3/i3blocks.conf
@@ -0,0 +1,45 @@
+# Define the custom separator in global properties for boilerplate
+full_text= 
+align=center
+separator=false
+separator_block_width=1
+
+[time]
+instance=ny
+TZ=America/New_York
+command=date +" %H:%M "
+interval=1
+background=#99FFFF
+color=#000000
+
+[date]
+instance=ny
+TZ=America/New_York
+command=date +" %y/%m/%d %b "
+interval=3600
+background=#999999
+color=#000000
+
+[packages]
+command=echo " PKGS: $(pacman -Q | wc -l) "
+interval=3600
+background=#FF9999
+color=#000000
+
+[volume]
+command=echo " VOLUME: $(pactl get-sink-volume @DEFAULT_SINK@ | awk -F"/" '{print $2}' | xargs) "
+interval=repeat
+background=#55CC77
+color=#000000
+
+[music]
+command=lua ~/.config/i3/music.lua
+interval=2
+background=#99FF99
+color=#000000
+
+[weather]
+command=echo " $(curl -Ss 'https://wttr.in?0&T&Q&M' | cut -c 16- | head -2 | xargs) "
+interval=3600
+background=#009999
+color=#000000
diff --git a/.config/i3/music.lua b/.config/i3/music.lua
new file mode 100644
index 0000000..1960f9b
--- /dev/null
+++ b/.config/i3/music.lua
@@ -0,0 +1,18 @@
+local shell_utils = require("shellutils")
+
+local status = shell_utils.get_output("playerctl status")
+local song   = shell_utils.get_output("playerctl metadata title")
+local artist = shell_utils.get_output("playerctl metadata artist")
+local album  = shell_utils.get_output("playerctl metadata album")
+
+if #album ~= 0 then
+    album = ("from %s "):format(album)
+end
+
+if status == "Playing" then
+    print((" Playing | %s by %s %s"):format(song, artist, album))
+elseif status == "Paused" then
+    print((" Paused  | %s by %s %s"):format(song, artist, album))
+else
+    print((" Stopped "):format(status))
+end
+\ No newline at end of file
diff --git a/.config/i3/music.sh b/.config/i3/music.sh
new file mode 100644
index 0000000..d678ed1
--- /dev/null
+++ b/.config/i3/music.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+
+status=$(playerctl status) 
+song=$(playerctl metadata title)
+album=" (`playerctl metadata album`)"
+
+if [ "$album" == " ()" ]
+then
+    album=""
+fi
+
+if [ $status = "Playing" ]
+then
+    echo " Playing | $song$album by $(playerctl metadata artist) "
+elif [ $status = "Paused" ]
+then
+    echo " Paused | $song$album by $(playerctl metadata artist) "
+else
+    echo " Stopped "
+fi
+\ No newline at end of file
diff --git a/.config/i3/shellutils.lua b/.config/i3/shellutils.lua
new file mode 100644
index 0000000..cb27943
--- /dev/null
+++ b/.config/i3/shellutils.lua
@@ -0,0 +1,16 @@
+local shell_utils = {}
+
+local temp_file_path = "/tmp/i3luacommandouput"
+
+function shell_utils.get_output(command)
+    os.execute(command .. " > " .. temp_file_path .. " 2> " .. temp_file_path)
+    local file = io.open(temp_file_path, "r")
+    if file == nil then
+        error("Can't read output.")
+    end
+    local output = file:read()
+    file:close()
+    return output or ""
+end
+
+return shell_utils
+\ No newline at end of file